Epson TM-T90 - Function 8> GS ( E Pl Ph Fn y C1 C2 [X D1

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
125 124
TM-T90
Specification
(STANDARD)
<Function 8> GS ( E p
L
p
H
fn y c1 c2 [x d1...d(y ×
××
× x) ]k (fn = 8)
[Format] ASCII GS ( E pL pH fn y c1 c2 [ x d1...d(y
×
x)]k
Hex 1D 28 45 pL pH fn y c1 c2 [ x d1...d(y
×
x)]k
Decimal 29 40 69 pL pH fn y c1 c2 [ x d1...d(y
×
x)]k
[Range] 5 ≤ (p
L
+ p
H
× 256) ≤ 65535 (0 ≤ pL ≤ 255, 0 ≤ pH ≤ 255)
fn = 8
y = 2 (when font C (8 × 16) is selected)
y = 3 (when any font except font C (8 × 16) is selected)
128 ≤ c1 ≤ c2 ≤ 255
0 ≤ x ≤ 12 (when font A (12 × 24) is selected)
0 ≤ x ≤ 9 (when font B (9 × 17) is selected)
0 ≤ x ≤ 10 (when Japanese font B (10 × 24) is selected)
0 ≤ x ≤ 8 (when Japanese font C (8 × 16) is selected)
0 ≤ d ≤ 255
k = c2 - c1 + 1
[Description] • Defines the data for each character on the character code page in the active area (RAM).
•
The character pattern is defined as the column type.
[Note] • This function code fn = 8 is enabled in the user setting mode.