Epson TM-T90 - GS I N

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
161 160
TM-T90
Specification
(STANDARD)
GS I n
[Name] Transmit printer ID
[Format] ASCII GS I n
Hex 1D 49 n
Decimal 29 73 n
[Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51, 65 ≤ n ≤ 69, n = 112
1 ≤ n ≤ 3, 49 ≤ n ≤ 51, 65 ≤ n ≤ 69 (When TM-T88II compatible mode is selected.)
[Description] • Transmits the printer ID specified.
•
n specifies the types of the printer ID.
n Printer ID type ID
1, 49 Printer model ID Hexadecimal: 2EH Decimal: 46
2, 50 Type ID See table below.
3, 51 Firmware version ID Depends on firmware version.
•
n specifies the printer information.
n Printer ID type ID
65 Firmware version Depends on firmware version
66 Manufacturer EPSON
67 Printer name TM-T90
68 Product ID Serial number
69 Type of model Japanese model: KANJI JAPANESE
Simplified Chinese model: CHINA GB2312
Traditional Chinese model: TAIWAN BIG-5
Thai model: THAI 3 PASS
Korean model: KOREA C-5601C
112 Status of DIP switches See ‘DIP switch status information’ on the next
sheets.
[Type ID]
Bit Off/On Hex Decimal Function
Off 00 0 Two-byte code characters not supported.
0
On 01 1 Two-byte code characters supported.
Off 00 0 Autocutter not installed.
1
On 02 2 Autocutter installed.
2 Off 00 0 Reserved.
3 Off 00 0 Reserved.
4 Off 00 0 Fixed.
5 Off 00 0 Reserved.
6 Off 00 0 Reserved.
7 Off 00 0 Fixed.