Epson TM-T90 - Function 48> GS ( L Pl Ph M Fn (Fn = 0, 48); Function 50> GS ( L Pl Ph M Fn (Fn = 2, 50)

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
141 140
TM-T90
Specification
(STANDARD)
<Function 48> GS ( L p
L
p
H
m fn (fn = 0, 48)
[Format] ASCII GS ( L p
L
p
H
m fn
Hex 1D 28 4C p
L
p
H
m fn
Decimal 29 40 76 p
L
p
H
m fn
[Range] (p
L
+ p
H
× 256) = 2 (p
L
= 2 , p
H
= 0)
m = 48
fn = 0, 48
[Description] • Transmits the total capacity of the NV bit-image memory (number of bytes in the memory
area).
Hexadecimal Decimal Amount of data
Header 37H 55 1 byte
Identifier 30H 48 1 byte
Data 30H – 39H 48 – 57 1 – 8 bytes
NUL 00H 0 1 byte
•
The data describing total capacity is converted to character codes corresponding to decimal
data, then transmitted from the MSB.
•
The data length is variable.
[Note] • The total capacity of the NV user memory is selectable as any one of these: [0, 64K, 128K,
192K, 256K, 320K, 384K] bytes with
GS ( E
. The default value is 384KB.
<Function 50> GS ( L p
L
p
H
m fn (fn = 2, 50)
[Format] ASCII GS ( L p
L
p
H
m fn
Hex 1D 28 4C p
L
p
H
m fn
Decimal 29 40 76 p
L
p
H
m fn
[Range] (
p
L
+
p
H
× 256) = 2 (
pL
= 2,
pH
= 0)
m
= 48
fn = 2, 50
[Description] • Prints the buffered graphics stored by the process of Function 112.
• Feeds paper by the amount corresponding to the number of dots in the
y
direction of the
buffered graphics.