Epson TM-T90 - Function 49> GS ( K Pl Ph Fn M (Fn = 49)

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
137 136
TM-T90
Specification
(STANDARD)
<Function 49> GS ( K p
L
p
H
fn m (fn = 49)
[Format] ASCII GS ( K p
L
p
H
fn m
Hex 1D 28 4B p
L
p
H
fn m
Decimal 29 40 75 p
L
p
H
fn m
[Range] (p
L
+ p
H
× 256) = 2 (p
L
= 2, p
H
= 0)
fn = 49
0 ≤ m ≤ 6, 250 ≤
m
≤ 255
[Default] m = 0 (setting value of the customized value)
[Description] • Specifies the print density.
m Print density
250
Standard print density × 70 %
251
Standard print density × 75 %
252
Standard print density × 80 %
253
Standard print density × 85 %
254
Standard print density × 90 %
255
Standard print density × 95 %
0
Standard print density (setting values of
GS ( E
<Function 5: a = 5>).
1
Standard print density × 105 %
2
Standard print density × 110 %
3
Standard print density × 115 %
4
Standard print density × 120 %
5
Standard print density × 125 %
6
Standard print density × 130 %
[Notes] • The print density specified by this function is relative to the print density specified with the
customized value (
a
= 5) of
GS ( E
.
• The range of the absolute ratio of the print density that can be set with the combination of this
function and the customized value (a = 5) of
GS ( E
<Function 5> is 130% maximum to 70%
minimum.