Epson TM-T90 Specification

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
164 163
TM-T90
Specification
(STANDARD)
GS T n
[Name] Set print position to the beginning of print line
[Format] ASCII GS T n
Hex 1D 54 n
Decimal 29 84 n
[Range] n = 0, 1, 48, 49
[Description] • Sets the print position to the beginning of the print line.
•
n specifies how data in the print buffer is processed when this command is executed.
n Function
0, 48 Sets the print position after the data in the print buffer is deleted.
1, 49 Sets the print position after the data in the print buffer is printed.
•
When printing is specified (n = 1, 49), the printer prints the data in the print buffer and
executes a line feed, based on the line feed amount to be set.
•
When deleting is specified (n = 0, 48), the printer executes the cancel process for the print
data in the print buffer, and keeps other data or setting values except for the print data.
➀
➀➀
➀ GS V m
➁
➁➁
➁ GS V m n
[Name] Select cut mode and cut paper
[Format] ➀ ASCII GS V m
Hex 1D 56 m
Decimal 29 86 m
➁ ASCII GS V m n
Hex 1D 56 m n
Decimal 29 86 m n
[Range] ➀ m = 0, 1, 48, 49
➁ m = 65, 66, 0 ≤ n ≤ 255
[Description] • Cuts paper in the specified mode.
m Function
0, 48
1, 49
Cuts paper (one point left uncut, full cut).
65, 66 Feeds and cuts paper (one point left uncut, full cut).
•
n specifies how data in the print buffer is processed when this command is executed.
[Note] • Full cut or one point left uncut cannot be changed by software.

Epson TM-T90 Specifications

General

Brand	Epson
Model	TM-T90
Category	Printer
Language	English