Epson TM-T90 - ESC C 4 N; ESC C 5 N

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
96 95
TM-T90
Specification
(STANDARD)
ESC c 4 n
[Name] Select paper sensor(s) to stop printing
[Format] ASCII ESC c 4 n
Hex 1B 63 34 n
Decimal 27 99 52 n
[Range] 0 ≤ n ≤ 255
[Default] n = 0
[Description] • Selects the paper sensor(s) to stop printing when a paper end is detected.
Bit Off/On Hex Decimal Function
0 Off 00 0 Roll paper near-end sensor disabled.
On 01 1 Roll paper near-end sensor enabled.
1 Off 00 0 Roll paper near-end sensor disabled.
On 02 2 Roll paper near-end sensor enabled.
2 ∼ 7
-- -- -- Reserved.
ESC c 5 n
[Name] Enable/disable panel buttons
[Format] ASCII ESC c 5 n
Hex 1B 63 35 n
Decimal 27 99 53 n
[Range] 0 ≤ n ≤ 255
[Default] n = 0
[Description] • Enables or disables the panel buttons.
•
When the LSB of n is 0, the panel buttons are enabled.
•
When the LSB of n is 1, the panel buttons are disabled.
[Note] • When the printer cover is open, the panel buttons are always ignored regardless of the setting
with this command.