Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET
NEXT
F
TM-T90
Specification
(STANDARD)
16 15
5) Acoustic noise (operating): Approximately 52 dB (ANSI bystander position)
NOTE: The value as shown above is measured when the EPSON evaluation printing pattern is
used. This value may be different, depending on the paper to be printed, the print duty, or
the print conditions, such as the print speed or the print density.
1.14 Installation
The TM-T90 series printer can be installed horizontally or vertically.
In the case of installing the printer vertically, attach the rubber feet packed in the printer’s box on the
rear of the printer and change the location of the paper roll near-end sensor (refer to Appendix C).
(Consider vibration during paper cutting and drawer usage. Take measures to prevent the printer from
moving. Affixing tapes are provided as an option.)
You can attach an optional hanging bracket to attach the printer to a wall. (Following the procedure
described in the user’s manual, install the wall mount and change the location of the paper roll near-end
sensor (refer to Appendix C).
To Next Page
Loading...
Need help?
General
