Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET
NEXT
F
TM-T90
Specification
(STANDARD)
4 3
1.2 Character Specifications
1) Number of characters: Alphanumeric characters: 95
Extended graphics: 128 × 11 pages
(including one space page)
International characters: 37
Japanese model: JIS (JIS X0208-1990): 6879
Special font:
Code System Number of Characters JIS Code Shift JIS Code
Special 845
2D-21 ∼ 2D-7E
79-21 ∼ 7C-7E
87-40 ∼ 87-9D
ED-40 ∼ EE-FC
FA-40 ∼ FC-4E
Refer to “Character Code Table (for Japanese font)” for details.
Multilingual character model supports printing with one of the following
character sets:
➀ Simplified Chinese (GB2312): 7580
(Using the GB5007 of the Chinese national standard font)
➁ Traditional Chinese (Big 5): 13494
➂ Thai characters (3-pass printing font): 128 characters × 7 pages
(133 character types)
➃ Korean Kanji (KS C5601): 8366
2) Character structure: Font A (12 × 24): 12 × 24
Font B (9 × 17): 9 × 17
Font B (10 × 24): 10 × 24
Font C (8 × 16): 8 × 16
Kanji font A (24 × 24): 24 × 24
Kanji font B (20 × 24): 20 × 24
Kanji font C (16 × 16): 16 × 16
Thai characters (12 × 72): 12 × 72
(When the font is configured with Font A (12 × 24))
Thai characters (9 × 51): 9 × 51
(When the font is configured with Font B (9 × 17))
Depending on the model, the supported fonts are different.
Font A is selected as the default
NOTE: Thai fonts that are built into this printer are 3-pass printing
fonts (*1) that are combined with three different parts, which
are shown in character code pages 20 through 26 for the
alphanumeric font. There are two kinds of Thai fonts: font A
(12 × 72) with 3-pass printing and font B (9 × 51) with 3-pass
printing.
(*1): 3-pass printing is the printing method to print one Thai
character with three character parts which are configured
vertically with upper, middle, and lower parts sent from the
host PC.
To Next Page
Loading...
Need help?
General
