Epson TM-T90 - DLE DC4 Fn D1

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
81 80
TM-T90
Specification
(STANDARD)
DLE DC4 fn d1…d7 (fn = 8)
[Name] Clear buffer(s)
[Format] ASCII DLE DC4 fn d1…d7
Hex 10 14 8 d1…d7
Decimal 16 20 8 d1…d7
[Range] fn = 8
d1 = 1, d2 = 3, d3 = 20, d4 = 1, d5 = 6, d6 = 2, d7 = 8
[Description] • Clears all data stored in the receive buffer and the print buffer.
•
Transmits the following three bytes of data.
Hex Decimal Amount of data
Header 37H 55 1 byte
Identifier 25H 37 1 byte
NUL 00H 0 1 byte
•
Enters standard mode.
[Notes] • This command must be inhibited for use in a system using this printer and the EPSON OPOS
/ JavaPOS
TM
driver.
• If print data includes a character string containing this command, the printer performs the
command. Users must consider this.
For example: Bit image data accidentally might include a data string with this command.
• Do not embed this command within another command.
For example: Bit image data might include this command.
• This command is ignored when block data is transmitted.