Epson TM-T90 - 1 General Specifcations; Printing Specifications

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
TM-T90
Specification
(STANDARD)
2 1
1. GENERAL SPECIFCATIONS
1.1 Printing Specifications
ANK/Multilingual Model Japanese Model
1) Printing method Thermal line printing
0.141 × 0.141 mm/dot
(180 × 180 dpi)
0.125 × 0.125 mm/dot
(203 × 203 dpi)
2) Dot density
[dpi: dots per 25.4 mm {1"}]
3) Printing direction Unidirectional with friction feed
Standard
(default)
Possible to select
(Using an optional
paper roll spacer)
Possible to
select
(See NOTE1)
Possible to
select
(See NOTE2)
Standard
(default)
4) Paper width
80 mm
{3.15"}
60 mm
{2.36"}
58 mm
{2.28"}
80 mm
{3.15"}
60 mm
{2.36"}
58 mm
{2.28"}
5) Maximum
printable area
72.2 mm
(512 dots)
54.1 mm
(384 dots)
50.8 mm
(360 dots)
72 mm
(576 dots)
54.5 mm
(436 dots)
52.5 mm
(420 dots)
6) Character per line
Font A (12×24)
42
32 30 48 36 35
Font B (9×17)
56 42 40 --- --- ---
Font B (10×24)
--- --- --- 57 43 42
Font C (8×16)
--- --- --- 72 54 52
Kanji font A
(24 × 24)
21 16 15 24 18 17
Kanji font B
(20 × 24)
--- --- --- 28 21 21
Kanji font C
(16 × 16)
--- --- --- 36 27 26
Thai characters
(12 × 72)
42 32 30 --- --- ---
Thai characters
(9 × 51)
56 42 40 --- --- ---
NOTE 1: Without an attached paper roll spacer, 80 mm {3.15"} paper width
can be used.
2: With changing the installation position of the attached paper roll
spacer, 60 mm {2.36"} paper width can be used.
3: ANK = alphanumeric