Epson TM-T90 - GS ∗ X y [D1; GS; M

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
159 158
TM-T90
Specification
(STANDARD)
GS ∗
∗∗
∗ x y [d1...d(x ×
××
× y ×
××
× 8)]
[Name] Define downloaded bit image
[Format] ASCII GS ∗ x y [d1...d(x
×
y
×
8)]
Hex 1D 2A x y [d1...d(x
×
y
×
8)]
Decimal 29 42 x y [d1...d(x
×
y
×
8)]
[Range] 1 ≤ x ≤ 255
1 ≤ y ≤ 48 (where x × y ≤ 1536)
0 ≤ d ≤ 255
[Description] • Defines the downloaded bit image using the number of dots specified by x and y.
•
x specifies the horizontal size of the downloaded bit image as a number of bytes.
•
y specifies the vertical size of the downloaded bit image as a number of bytes.
[Notes] • When memory switch 8-7 is On, the user-defined character and the downloaded bit image
cannot be defined simultaneously. The downloaded bit image data is cleared with this
command.
GS / m
[Name] Print downloaded bit image
[Format] ASCII GS / m
Hex 1D 2F m
Decimal 29 47 m
[Range] 0 ≤ m ≤ 3, 48 ≤ m ≤ 51
[Description] • Prints the defined downloaded bit image in m mode.
<For ANK/Multilingual model>
m Mode Vertical dot density Horizontal dot density
0, 48 Normal 180 dpi 180 dpi
1, 49 Double-width 180 dpi 90 dpi
2, 50 Double-height 90 dpi 180 dpi
3, 51 Quadruple 90 dpi 90 dpi
<For Japanese model>
m Mode Vertical dot density Horizontal dot density
0, 48 Normal 203 dpi 203 dpi
1, 49 Double-width 203 dpi 203/2 dpi
2, 50 Double-height 203/2 dpi 203 dpi
3, 51 Quadruple 203/2 dpi 203/2 dpi
dpi: dots per 25.4 mm {1"}