Epson TM-T90 - Obsolete Commands; FS P N M [Obsolete Command]

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
184 183
TM-T90
Specification
(STANDARD)
6.5 Obsolete Commands
FS p n m
[obsolete command]
GS ( L
<Function 69>, which is the upward-compatible command replacing
FS p
, is recommended for
use, since
FS p
is an obsolete command in the ESC/POS
®
command system.
[Name] Print NV bit image
[Format] ASCII FS p n m
Hex 1C 70 n m
Decimal 28 112 n m
[Range] 1 ≤ n ≤ 255
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
[Description] • Prints an NV bit image n in m mode.
<For ANK/Multilingual model>
m Mode Vertical dot density Horizontal dot density
0, 48 Normal 180 dpi 180 dpi
1, 49 Double-width 180 dpi 90 dpi
2, 50 Double-height 90 dpi 180 dpi
3, 51 Quadruple 90 dpi 90 dpi
<For Japanese model>
m Mode Vertical dot density Horizontal dot density
0, 48 Normal 203 dpi 203 dpi
1, 49 Double-width 203 dpi 203/2 dpi
2, 50 Double-height 203/2 dpi 203 dpi
3, 51 Quadruple 203/2 dpi 203/2 dpi
dpi: dots per 25.4 mm {1"}