Epson TM-T90 - Page 166

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
149 148
TM-T90
Specification
(STANDARD)
[Description] • Stores the raster graphics data, enlarged by
bx
and
by
in the horizontal and vertical directions
in the print buffer.
•
x
L
,
x
H
specify the raster graphics data in the horizontal direction as (
x
L
+
x
H
× 256) dots.
•
y
L
, y
H
specify the raster graphics data in the vertical direction as (y
L
+ y
H
× 256) dots.
•
c
specifies the color of the defined data.
c Printing color
49 Color 1
50 Color 2
•
Color 1 means black (a high level of energy) on the specified two-color thermal paper.
•
Color 2 means red (a low level of energy) on the specified two-color thermal paper.
[Note] • In standard mode, each color can be defined only once.
GS ( M p
L
p
H
fn m
[Name] Customize printer
[Description] • Protects or recovers values or data set or defined in the active area by commands.
fn Format
Function No
. Function
1, 49
GS ( M
p
L
p
H
fn m
1 Copies the settings stored in the active area
to the storage area (save settings).
2, 50
GS ( M
p
L
p
H
fn m
2 Copies the settings stored in the storage area
to the active area (load settings).
3, 51
GS ( M
p
L
p
H
fn m
3 Enables or disables automatic loading of the
settings upon initialization.
•
Active area: Volatile memory (RAM)
•
Storage area: Non-volatile memory (Flash ROM)
• List of commands that are affected by this command.
Setting value Command
Status
ESC c 3
,
GS a
Defined data
GS :
Characters
Kind of character
ESC M
,
ESC R
,
ESC t
Style
ESC !
,
ESC –
,
ESC E
,
ESC G
,
ESC V
,
ESC {
,
GS !
,
GS B
,
GS b
,
GS ( N
Etc.
ESC SP
,
ESC 2
,
ESC 3
Bar codes
GS H
,
GS f
,
GS h
,
GS w
2-dimensional codes
GS ( k
<Function 065> through <Function 070>
Print position
ESC D
,
ESC T
,
ESC a
,
GS L
,
GS W
Etc.
ESC c 4
,
ESC c 5
,
GS ( D
,
GS ( H
<Function 49>,
GS P