Epson TM-T90 - Page 76

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
59 58
TM-T90
Specification
(STANDARD)
2) Customized value
The customized value is set with the
GS ( E
command.
Function Value
1KB 64KB Selection of the user NV memory
capacity
128KB 192KB
None 64KB
128KB 192KB
256KB 320KB
Selection of the NV graphics
memory capacity
384KB --
58 mm 60 mm Selection of the paper width
80 mm --
One-part energizing Two-part energizing Selection of the print control
Three-part energizing Four-part energizing
70% 75%
80% 85%
90% 95%
100% 105%
110% 115%
120% 125%
Selection of the print density
130% --
Selection of the print speed
ANK/Multilingual Model
Selectable 9 steps (Level 1 to 9)
Japanese Model
Selectable 11 steps (Level 1 to 11)
Selection of the paper Single-color Two-color
Light Medium Selection of black-color density in
two-color printing
Dark --
NOTES: • Since the NV graphics data area and the user NV memory use a common area, the
usable area for each is limited. See
GS ( E
<Function 5> for details.
• The maximum print speed is available in the one-part energizing mode. However, in the
ANK/Multilingual model, even if the one-part energizing mode is selected, two-part
energizing is selected automatically if the print duty is high-ratio. But, in the Japanese
model, the head energizing is not divided regardless of any print control setting.
• Four-part energizing mode can reduce power consumption.