Epson TM-U375 - Solenoid-Paper Holding Switching Attachment

5-30
Assembly
Step
Assembly ProcedurePart Name
Main Assembly 7 Solenoid-Paper Holding Switching Attachment
1
★
• Align hole A of the Main frame assembly with hole B of the Solenoid-
Paper holding switching; then secure the solenoid with the screw.
When attaching the solenoid, adjust its position so that the space
between the lower end of hole C and the lower end of hole D is within
0.5 mm (.02").
<Checkpoint>
• Make sure to route the lead wires between portion E and the right side
of the frame.
Solenoid-Paper holding switch-
ing
CC (M3 x 5) x 1
CONFIDENTIAL