Epson TM-U375 - Main Assembly; Main Circuit Board Unit, Cables, and Cover-Circuit Board Attachment

5-49
5.4.3 Main Assembly
Main Assembly 1 Main Circuit Board Unit, Cables, and Cover-Circuit Board
Attachment
Main Assembly 1 for the TM-U375P is different from this description. Refer to Chapter 7 for the TM-U375P.
Assembly
Step
1
2
3
4
5
6
7
8
Assembly ProcedurePart Name
Main circuit board unit
Sub-assembly C
Motor cable assembly
Head cable assembly
Carriage motor cable assembly
Power switch assembly
Plate-Base assembly
Sub-assembly E
Hexagon lock screw x 2
Cover-Circuit board
CP (P) (M3 x 5) x 4
• Attach the Motor cable, Head cable, Carriage motor cable, and
Power switch assemblies to the corresponding connectors on the
Main circuit board unit.
• Place the Main circuit board unit on the Plate-Base assembly.
• Fasten the Main circuit board unit to the Plate-Base assembly with
the Hexagon lock screws.
• Place the Cover-Circuit board on the Main circuit board unit and
fasten the cover with the screws.
CONFIDENTIAL