Epson TM-U375 - Main Assembly; Paper Take-Up Drive Pulley a and Platen Holder Unit Attachment

5-24
5.3.3 Main Assembly
Main Assembly 1 Paper Take-up Drive Pulley A and Platen Holder Unit Attachment
Assembly
Step
Assembly ProcedurePart Name
1
2
3
4
5
Main frame assembly
Paper take-up drive pulley A
RE (2.3) x 1
Paper take-up drive gear
Platen holder unit
Sub-assembly G
J feed roller shaft holder (left)
RE (2.3) x 1
• Attach Paper take up drive pulley A to the Main frame assembly and
fasten it with the E-ring.
• Attach the Paper take-up drive gear to the J feed roller shaft.
• Place the Platen holder unit inside the Main frame assembly so that
the J feed roller shaft holder (right) and J driving gear emerge from
hole A.
• Attach the J feed roller shaft holder (left) to the Main frame
assembly, aligning the U-shaped surfaces.
• Attach the E-ring to groove B of the J feed roller shaft.
CONFIDENTIAL