Epson TM-U375 - Print Frame Unit B Attachment

5-38
Assembly
Step
Assembly Procedure
Main Assembly 15 Print Frame Unit B Attachment
• Align the dowels of the Print frame unit B with the U-shaped
grooves of the Main frame assembly.
• Tighten the screws in order of 1 to 4.
<Checkpoint>
• Make sure to tighten the screws in the proper order.
<Adjustment>
• Adjust the platen gap as described in
Adjustment D in Section 5.3.4.
Part Name
Print frame unit B
Sub-assembly I
CCS-tite (M3 x 8) x 2
CCS-tite (M3 x 6) x 2
1
★
★
CONFIDENTIAL