Epson TM-U375 - B Relay Circuit Board Assembly; C Carriage Assembly

5-8
Sub-assembly B Relay Circuit Board Assembly
Assembly
Step
Part Name Assembly Procedure
1
2
3
★
• Solder the lead wires of the Carriage sensor sub-assembly and the
Home position sensor sub-assembly to the Relay circuit board
sub assembly terminals.
<Checkpoint>
• Make sure not to confuse the lead wire colors.
Relay circuit board sub-ass'y
Carriage sensor sub-assembly
Home position sensor sub-as-
sembly
Sub-assembly C Carriage Assembly
Assembly
Step
Part Name Assembly Procedure
1
2
★
• Align the ribbed section of the Belt with the ribbed section of the
Carriage sub-assembly, and mount the Belt.
<Checkpoints>
• Make sure to mount the Belt with the correct orientation.
• Verify that the Belt is fully inserted to the bottom of the belt mounting
portion.
Carriage sub-assembly
Belt
CONFIDENTIAL