Epson TM-U375 - Feed Roller Assembly, Intermediate Holding; Roller Assembly, and S Belt Attachment

5-31
Main Assembly 8 S Feed Roller Assembly, Intermediate Holding Roller Assembly, and
S Belt Attachment
Assembly
Step
Assembly ProcedurePart Name
1
2
3
S feed roller assembly
RE (2.3) x 1
Intermediate holding roller as-
sembly
S belt
• Insert the S feed roller assembly in holes A and B from the bottom of
the Main frame assembly. Secure the roller assembly with the E-ring.
• Insert the Intermediate holding roller assembly from inside the Main
frame assembly in hole C.
• Attach the S belt to the small gear of the Intermediate holding gear
and to the S feed gear; then insert the Intermediate holding roller
assembly in hole D.
CONFIDENTIAL