Epson TM-U375 - G Platen Holder Unit Assembly

5-11
Assembly
Step
1
2
3
4
5
★
Assembly ProcedurePart Name
Sub-assembly G Platen Holder Unit Assembly
Platen
V movable lever spring
Plate-Platen mounting
CBS-tite (M3 x 5) x 2
Platen holder
Cover-Platen holder
• Attach the V movable lever spring to hook A of the Platen.
• Align the dowel holes of the Platen with the dowels of the Plate-Platen
mounting, and fasten the Platen with the screws.
• Attach the assembled Plate-Platen mounting to the Platen holder.
• Attach the Cover-Platen holder to the Platen holder.
<Checkpoint>
• Verify that there is platen play left and right, and up and down.
CONFIDENTIAL