Epson TM-U375 - Printer Mechanism Assembly Attachment to the Case-Main

5-54
Assembly
Step
Assembly ProcedurePart Name
Main Assembly 6 Printer Mechanism Assembly Attachment to the Case-Main
1
2
3
(4)
• Insert the Sleeves into the Vibration spacers.
• Attach the assembled Vibration spacers to the Printer mechanism
assembly.
• Gently place the Printer mechanism assembly on the Case-Main by
attaching the back of the mechanism assembly first, at an angle.
• Fasten the Printer mechanism assembly with the screws.
• Connect the cables from the Printer mechanism assembly to CN11
and CN12; then position the cables as shown in the figure.
Sleeve x 4
Vibration spacer x 4
Printer mechanism assembly
CPT-B (P2) (M2.6 x 24) x 4
(Cables)
CONFIDENTIAL