Epson TM-U375 - H Ribbon Frame Assembly B

5-16
Sub-assembly H
Assembly
Step
Assembly ProcedurePart Name
9
★
10
11
(12)
★
Guide-Slip paper
CCS-tite (M2.5 x 5) x 2
Lever-Ribbon frame
Spring-Ribbon frame
(Lead wires)
• Insert the feet of the Microswitch into position F of the Guide-Slip
paper.
• Attach the Microswitch to the Guide-Slip paper by aligning the
dowel and hole with the hole and dowel of the Guide-Slip paper.
• To attach the Guide-Slip paper to the Frame-Ribbon, attach the
Microswitch to the frame at first, and attach the Lever-J insertion
by inserting it into hole G and aligning dowel H with indent I; then
secure the Guide-Slip paper with the screws.
<Checkpoint>
• Verify that the Microswitch, Guide-Slip paper and Frame-Ribbon
are attached together with their dowels and dowel holes.
• Turn over the Frame-Ribbon and insert the Lever-Ribbon frame in
hole J.
• Attach the Spring-Ribbon frame to portions K and L.
• Thread the microswitch lead wires through catch M.
<Checkpoint>
• Verify that the lead wires are threaded through catch M of the Lever-
Ribbon frame.
CONFIDENTIAL