Epson TM-U375 - Paper Feed Motor and Form Stopper Assembly Attachment

5-34
Assembly
Step
Assembly ProcedurePart Name
Main Assembly 11 Paper Feed Motor and Form Stopper Assembly Attachment
1
2
★
Paper feed motor
CCS-tite (M2.5 x 5) x 1
Form stopper assembly
RE (3.0) x 1
• Attach the Paper feed motor to the Main frame assembly so that
portions A and B hold the motor; then tighten the screws.
• Attach the Form stopper assembly to the Main frame assembly
from the inside, and insert the shaft of the stopper into hole C; then
install the E-ring.
<Adjustment>
• Adjust the backlash between the Gear-Intermediate and Gear-paper
feed motor as described in
Adjustment A in Section 5.3.4.
CONFIDENTIAL