Epson TM-U375 - Lead Wire Connection and Handling

5-36
Assembly
Step
Assembly Procedure
Main Assembly 13 Lead Wire Connection and Handling
• Attach the paper holding switching and platen switching solenoids
connector, paper feed motor connector, and V sensor assembly
connector together as shown in the figure.
• Dress all wires except for the Solenoid-Paper holding switching
along portion A.
• Bind all wires except for the Solenoid-Paper holding switching with
the Cable tie.
• Bundle all wires where they contact the Main frame assembly, using
the Insulation adhesive tape.
Part Name
(Connectors)
Cable tie
Insulation adhesive tape
(1)
2
3
CONFIDENTIAL