Epson TM-U375 - E Guide Frame Assembly B; F V Sensor Assembly

5-10
Assembly
Step
1
2
3
4
Assembly ProcedurePart Name
Sub-assembly E Guide Frame Assembly B
J holding roller shaft
J holding roller
Guide frame sub-assembly B
RE (1.5) x 1
Spring-J holding roller
RE (1.5) x 1
• Insert the J holding roller shaft into the J holding roller.
• Insert the J holding roller shaft into holes A and B of the Guide frame
sub-assembly B; then attach the E-ring outside of hole A.
• Engage the Spring-J holding roller on the J holding roller shaft;
then attach the E-ring to the shaft outside of the spring.
Assembly
Step
1
2
★
Assembly ProcedurePart Name
Sub-assembly F V Sensor Assembly
V sensor sub-assembly
Sensor holder
• Insert the V sensor sub-assembly into the Sensor holder.
<Checkpoint>
• Verify that the V sensor sub-assembly is locked with pawl A.
CONFIDENTIAL