Epson TM-U375 - Intermediate Gear B, Gear-Intermediate, Paper; Shaft Attachment

5-33
Main Assembly 10 Intermediate Gear B, Gear-Intermediate, Paper Holding Lever
Assembly, and Paper Holding Lever Shaft Attachment
Assembly
Step
Assembly ProcedurePart Name
1
2
3
4
★
Intermediate gear B
Gear-Intermediate
RE (2.3) x 1
Paper holding lever assembly
Sub-assembly D
Paper holding lever shaft
RE (2.3) x 2
• Attach Intermediate gear B to the Main frame assembly with the
small gear facing inside.
• Attach the Gear-Intermediate to the Main frame assembly with the
small gear facing inside; then secure it with the E-ring.
• Insert shaft A into the Solenoid-Paper holding switching.
• Insert the Paper holding lever shaft into hole B and pass it through the
Paper holding lever assembly; then attach two E-rings inside holes
B and C.
<Checkpoint>
• Verify that the S holding roller shaft is seated on the Paper holding
lever assembly.
CONFIDENTIAL