Epson TM-U375 - C Main Circuit Board Unit

5-46
Sub-assembly C Main Circuit Board Unit
Assembly
Step
Part Name Assembly Procedure
1
2
★
Main circuit board assembly
P-ROM
• Attach the P-ROM to the socket of the Main circuit board assembly,
matching the U-shaped grooves of the socket to the P-ROM.
<Checkpoint>
• Make sure not to mistake the direction of the P-ROM.
Sub-assembly D Paper Take-up Gear Assembly
Assembly
Step
Part Name Assembly Procedure
1
2
3
Paper take-up gear
Paper take-up torque spring
paper take-up drive pulley
• Place the catch of the Paper take-up torque spring on the Paper
take-up gear.
• Place the cutout of the Paper take-up drive pulley on the catch of the
Paper take-up torque spring; then push the pulley to attach it.
CONFIDENTIAL