Epson TM-U375 - Sub-Assembly; A FFC Guide Assembly

5-7
5.3.2 Sub-assembly
Sub-assembly A FFC Guide Assembly
Assembly
Step
1
2
★
Part Name
Assembly Procedure
FFC-Print head
Guide-FFC
• Put a mark on the FFC-Print head at 66.5 mm (2.62") from its bent
portion.
• Attach the FFC to the Guide-FFC as shown in the figure.
<Checkpoint>
• Make sure that the FFC-Print head marked portion aligns with the
Guide-FFC portion A.
CONFIDENTIAL