5-12
Assembly
Step
Assembly ProcedurePart Name
Sub-assembly G
6
7
8
★
Platen adjustment roller x 2
Platen adjustment roller holder
x2
V movable lever
• Attach the Platen adjustment rollers to the Platen holder so that the
bottoms of the rollers are inserted in the rectangular holes on the
Plate-Platen mounting.
• Press the Platen adjustment roller holders into the Platen holder
by covering the Platen adjustment rollers with the holders.
• Align tabs B with portions C, and attach the V movable lever spring
to hook D.
<Checkpoint>
• Make sure to fully press in the Platen adjustment roller holders.
CONFIDENTIAL
To Next Page
Loading...
