7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
Revision 1.1.3 Page - 131
7.29.1.5. ANC-LTC Source
This control selects the source of Timecode for the ANC-LTC timecode to be embedded on the output.
Select Embedded to use RP188 ancillary time code (ATC) as the source for high definition video formats
or Vertical interval time code (VITC) as the source for standard definition video formats. When Off is
selected, there will be no timecode on the output video.
If no Timecode is detected, it will not be embedded on the output video.
To Next Page
Loading...
