evertz MultiFrame 7814 Series - Source Select Controls

7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
Revision 1.1.3 Page - 111
7.24.1. Source Select Controls
The Source Select section enables the user to assign a particular channel to be used as a particular audio
source in the IntelliGain. There are sixteen sources of audio that feeds the IntelliGain process: Module 1,
channel 1 - 4, module 1, channel 5 – 8, Module 2 channel 1 – 4 and module 2 channel 5 – 8. Each of
these sources can be assigned a specific channel of audio using the appropriate drop down menu. For
sake of brevity, only Module 1 channel 1 selection process is shown.
7.24.1.1. Source X
The Source X control enables the user to route one of the 16 internally processed input audio channels to
the X input of the channel mixer. The user can select the channel source by selecting the desired
channels from the Source X drop down menu as shown below.
L Source X
Mute
AES 5.B
Channel 1
AES 6.A
Channel 2
AES 6.B
Channel 3
AES 7.A
Channel 4
AES 7.B
Channel 5
AES 8.A
Channel 6
AES 8.B
Channel 7
Mono mix channels 1 and 2
Channel 8
Mono mix channels 3 and 4
Channel 9
Mono mix channels 5 and 6
Channel 10
Mono mix channels 7 and 8
Channel 11
Mono mix channels 9 and 10
Channel 12
Mono mix channels 11 and 12
Channel 13
Mono mix channels 13 and 14
Channel 14
Mono mix channels 15 and 16
Channel 15
Down mix L
Channel 16
Down mix R
AES 1.A
Down mix Mono
AES 1.B
Up mix L
AES 2.A
Up mix R
AES 2.B
Up mix C
AES 3.A
Up mix LFE
AES 3.B
Up mix Ls
AES 4.A
Up mix Rs
AES 4.B
Up mix Pass L
AES 5.A
Up Mix Pass R