evertz MultiFrame 7814 Series - Video Control Tab; Figure 7-2: Video Tab

7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
Page - 38 Revision 1.1.3
7.1. VIDEO CONTROL TAB
The video control tab contains the main controls used for configuring the conversion path including source
of video, the input and output video standards, and frame sync output timing. In addition, the loss of video
mode, user added video delay and Force Freeze frame controls can also be found on this tab. The status
of several monitored video and traps parameters are also reported in this control tab.
Figure 7-2: Video Tab