evertz MultiFrame 7814 Series - Specifications; Serial Digital Video Input; Serial Digital Video Output; Reference Video Input

7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
Revision 1.1.3 Page - 17
3. SPECIFICATIONS
3.1. SERIAL DIGITAL VIDEO INPUT
Standard:
270 Mb/sec SMPTE 259M
1.485 Gb/sec SMPTE 292M (1080i/720 @ 59.94 or 50 Hz)
2.970 Gb/sec SMPTE 425M* (-3G versions only)
Number of Inputs:
2 (PGM A and PGM B)
Connector:
DIN 1.0/2.3 CECC 22 230, DIN 47297 and DIN 41626
Signal Level:
1V nominal
Input Equalization:
Automatic to 300m @ 270 Mbs with Belden 1694 or equivalent
Automatic to 100m @ 1.485 Gbs with Belden 1694 or equivalent
Automatic to 80m @ 2.970 Gbs with Belden 1694 or equivalent (-3G version
only)
Return Loss:
> 15 dB to 1.5 GHz
> 10 dB to 3.0 GHz
3.2. SERIAL DIGITAL VIDEO OUTPUT
Standard:
270 Mb/sec SMPTE 259M
1.485 Gb/sec SMPTE 292M (1080i/720 59.94 or 50 Hz)
2.970 Gb/sec SMPTE 425M* (-3G versions only)
Number of Outputs:
3
Connector:
DIN 1.0/2.3 CECC 22 230, DIN 47297 and DIN 41626
Signal Level:
800 mV nominal
SD Rise/Fall Times:
740 ps nominal
HD Rise/Fall Times:
200 ps nominal
Return Loss:
> 15 dB to 1.5 GHz
> 10 dB to 3.0 GHz
3.3. REFERENCE VIDEO INPUT
Type:
HD Tri-Level sync, NTSC or PAL Colour Black 1 V p-p
Connector:
DIN 1.0/2.3 CECC 22 230, DIN 47297 and DIN 41626
Termination:
75 ohm
* References to 3G, SMPTE 424M/SMPTE 425 and single link 1080p59.94/50 refer 10 bit 4:2:2 1080p59.94/50 signals (Level A or B in SMPTE 425M)
References to dual link 1080p59.94/50 refer to SMPTE 372M mapping for 1080p59.94/50 4:2:2 10 bit data format only.
When set to output 372M dual link, PGM OUT1/2 are assigned for LINK A and PGM OUT3 is assigned to LINK B output.
Initial release will not support +CF option for 1080p59.94/50 output signals