7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
Revision 1.1.3 Page - 3
Summary of 7814 Series Features:
• Dual path processing in a single modular form factor
• Broadcast quality up/down/cross conversions between common SD/SMPTE 259M and HD/SMPTE
292M video formats
• Optional support to convert to/from common 3G/SMPTE424M 1080p signal formats (-3G versions)
• Integrated frame sync capabilities and external reference input for phasing of output video
• Support for 7700FR-G and 7800FR FRAME REFERENCE inputs
• Upon loss of video frame syncs may set to FREEZE mode or output black or blue video
• Evertz proprietary detail enhancement for optimum picture sharpness
• Leading edge video noise reduction technologies:
o 3D pixel adaptive spatial-temporal noise reduction
• New generation de-interlacing technologies:
o Pixel adaptive motion processing to maintain maximum vertical resolution
o Advanced directional edge interpolation to minimize “jaggies” typically seen when
converting interlaced video to progressive video
o Advanced film mode processing for mathematically lossless de-interlacing of video content
with embedded 3:2 and 2:2 pull-down
• Wide range video proc functions including both RGB gains/offsets and YCbCr gains/offsets
• Internal RGB colour legalizer (+ICL2)
• Overall and per component RGB video gamma correction controls
• Dedicated Ethernet port
• Supports all required colour space conversions (rec. 601 to 709)
• Supports standard and user defined aspect ratio conversions
• Fully AFD enabled with frame accurate and glitch free AFD driven transitions between ARC modes
• 16 channel embedded audio support per path
• Supports 8 external AES inputs and 8 AES outputs per Path (-AES8 version only)
• Audio delay tracks video delay
• Full audio proc and channel swapping
• Optional Stereo to 5.1 surround sound up-mix (+UMX2)
• Optional Intelligain Loudness Management (+IG2)
• 5.1 surround sound to stereo (Lt/Rt and Lo/Ro) down-mix
• Transfers closed caption and time information from input to output with all required SD ↔ HD data
translations and time code re-calculations.
• SNMP and VistaLINK® capable when used in conjunction with a 7700FC/7800FC for remote
monitoring, control and configuration capabilities using VistaLINK® PRO, CP-2116E or CP-2232E
Control Panels.
To Next Page
