7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
Page - 50 Revision 1.1.3
7.4.1.6. Luma Floor
This control selects the minimum Luma value that will be enhanced with a range of 0 to 15. The default
value is 1. Pixels with a value below this floor will be left untouched.
7.4.1.7. Detail Noise Floor
When the image detail has a value that is below this floor it will be deemed to consist mostly of noise. As
such, the pixel associated with that detail level would be left untouched. The detail noise floor has a valid
range of 0 to 15 with a default value of 2.
By pressing the Reset
button, all Image Enhancement Controls will return to their
default setting.
To Next Page
Loading...
