Evoqua DEPOLOX - Page 47

DEPOLOX
®
Pool Operation
WT.050.570.000.DE.IM.0714 47
1.3
pH settings
(menu 1.2)
Basic display Refer to main menu
Menu select Display of all available menus
Menu pH Display of all available pH settings
pH actuator
 Control output 
pH settings
 Control direct.  Acid / alkaline
 Tp  10 ... 180 s
 Xsh  1.0 ... 5.0 %
 Ty  10 ... 180 s
 Pulses max./min  100 / 120
pH parameters
 Setpoint  within measuring range
 Xp  0001 ... 1000 %
 Tn  000.0 ... 100.0 min
 Ymin  000.0 ... 100.0 %
 Ymax  000.0 ... 100.0 %
pH limit values
 Min  within measuring range
 Max  within measuring range
 Hysteresis  0.01 ... 0.25 pH
 Flocc. (min)  within measuring range*
 Flocc. (max)  within measuring range *
pH measuring range
 Range-start  0.00 ... 5.00 pH
 Range-end  9.00 ... 14.00 pH
NOTE
The data is only displayed if the function "ON" has been selected in the
"Inputs/Outputs" menu, "External Functions" (display 1.7.7) under
"Flocculation".
 Electr.Pos.wo.Ym
 Dosing pump 2P
 Dosing pump 3P
 Pulse pump 2P
 Pulse pump 3P
 Analog output.2P
 Analog output.3P
*