Extron electronics SMP 300 Series - Status

SMP300 Series • Web-Based User Interface 98
Status
The Status page within the Troubleshooting page displays factory-defined and
user-defined information about the unit. This page contains the unit name, part number,
firmware version, MAC address, location description, and related information about the unit.
It also displays the current audio bit rate and the video bit rates for all encoding streams.
Some of the information in this page can also be found using SIS commands (see
Command and Response Tables starting on page114) or the front panel (see Status
Menu on page48).
To open this page, click the Troubleshooting tab at the top of the SMP300 Series
embedded web pages and then click the Status tab on the second tier of tabs (see
figure80).
Figure 80. Troubleshooting Tab, Status Sub-tab
The Status page opens, showing the Detailed System Status and Encoder Status
panels (see figure81).
Figure 81. Status Page
All of the items on this page are read-only except:
• The hyperlink to the Extron website Find new firmware on Extron.com (see figure81,
1
) where updated firmware for the unit is located.
• The Date & Time Sync button (
2
) commands the unit to sync its internal clock time
and date with the settings from an NTP server.
80
81