Extron electronics SMP 300 Series - Mirroring Linklicense

SMP300 Series • Web-Based User Interface 103
Mirroring LinkLicense
If the SMP has been upgraded with the Horizontal Video Mirroring LinkLicense, the web UI
will have a Mirroring LinkLicense tab. The Mirror LinkLicense page has two panels:
Recording Settings, and Horizontal Video Mirroring Settings that are used to
configure the SMP for one button recording.
To open this page, click the Mirroring LinkLicense tab at the top of the embedded web
pages (see figure90).
Figure 90. Mirroring LinkLicense Tab
The Mirroring LinkLicense page opens with two expandable panels (see figure91).
Figure 91. Mirror LinkLicense Page
The panels in the Mirror LinkLicense page are:
1
Recording Settings —
• Set the delay time to start recording after the record command has been issued
(default is 5 seconds).
• Set the minimum recording time on a recording destination (default is 5 minutes).
2
Horizontal Video Mirroring Settings — Enable Horizontal Video Mirroring
for one or more inputs. This feature shows the video or stream as a reflected image on
the central vertical axis, as the SMP flips the video horizontally, to allow the notes to be
displayed correctly, if the presenter is standing behind a glass marker board, facing the
camera to address the audience while writing notes on the board.
For detailed information on configuring the Mirroring LinkLicense page settings, see
the SMP300SeriesEmbedded Web Pages Help File.
90
91