Extron electronics SMP 300 Series User Manual

SMP300 Series • Web-Based User Interface 72
Configuration
The eight pages within the Configuration page contain the core controls needed during
initial setup, for upgrading the unit, and restoring a configuration.
NOTE: Administrators can view and make changes to all settings. Those logged in as
users do not have access to the Configuration tab.
Figure 49. Configuration Tab with Subtabs
Using these pages, an administrator can:
• Configure basic AV input settings.
• Output video test patterns for setup.
• Configure output stream settings and presets.
• Set up AV encoding and presets.
• Select or configure layouts and layout presets.
• Set passwords.
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is no password (see Users and Roles
on page86 to change a password).
• Set up notices and alarms.
• Select preview window settings.
• Configure digital I/O ports.
• Configure basic communication, identity, time, data storage, and recording location
settings.
• Upgrade the unit by updating firmware or installing an Extron LinkLicense (see
page3).
• Save configurations or restore a configuration from a saved file.
49

Extron electronics SMP 300 Series Specifications

General

Brand	Extron electronics
Model	SMP 300 Series
Category	Computer Hardware
Language	English