Extron electronics SMP 300 Series User Manual

SMP300 Series • Web-Based User Interface 69
Publish Settings
The Publish Settings page provides controls to specify and configure the server
destination to upload completed recordings.
Firmware v2.xx Publish Settings
The Firmware v2.xx Publish Settings page has two panels: Active Profiles and
Publishing Destination Configuration, which has three sub-pages to specify the
server destination to upload completed recordings, to configure and test protocols and
settings to enable publication (uploading), and to automatically delete internal recording
folders after successfully publishing the folders.
NOTE: The SMP 300 Series device has the basic Schedule Settings and Publish
Setting tabs while operating with firmware v2.xx (xx = latest version).
Figure 46. Publish Settings Page
Select the desired radio button for an Active Schedule Source from these options:
Active Schedule Source Corresponding Tab
No Centralized Schedules (adhoc event only)
(default)
Not applicable
Manually import iCalendar one time Manual Calendar Import
Import iCalendar data periodically Periodic Calendar Import
Centralized Schedule as Microsoft server Microsoft Exchange Server
Centralized Schedule as Opencast Server Opencast Server
Select the desired radio button for a publishing destination from these options:
Active Publishing Destination Corresponding Tab
No Centralized upload server (default)
Not applicable
Ingest into Kaltura Hosted Video Platform Kaltura Ingest
Ingest into Opencast Server Opencast Ingest
FTP/SFTP/CIFS server Other FTP/SFTP/CIFS
For additional information and details on how to configure settings for each publishing
option, see the SMP300SeriesEmbedded Web Pages Help File.
46

Extron electronics SMP 300 Series Specifications

General

Brand	Extron electronics
Model	SMP 300 Series
Category	Computer Hardware
Language	English