SMP300 Series • Reference Information 150
Push Stream and Pull Stream Playback URLs
To verify a running stream, use the templates below to place the stream into the VLC "Open
Network Stream" dialog (see step 5 of Playing a Pull Stream Using VLC Media Player
on page153). Substitute the SMP IP address for <SMP35x_IP>. Substitute the destination
IP address and port number for <DESTINATION_IP>:DESTINATION_PORT.
Pull Stream URLs
PULL Streaming: URL
RTSP Unicast
(Archive Channel A)
rtsp://<SMP35x_IP>/<stream name 1>
RTSP Unicast (Archive Channel B)
rtsp://<SMP35x_IP>/<stream name 2>
NOTE: This stream is available only on units that are set for dual
encoding mode.
RTSP Unicast (Confidence)
rtsp://<SMP35x_IP>/<stream name 3>
RTSP Multicast
(Archive Channel A)
rtsp://<SMP35x_IP>/<stream name 1>/multicast
or
HTTP://<SMP35x_IP>/live/pull/multicast1.sdp
RTSP Multicast
(Archive Channel B)
rtsp://<SMP35x_IP>/stream name 2/multicast
or
HTTP://<SMP35x_IP>/live/pull/multicast2.sdp
NOTE: This stream is available only on units that are set for dual
encoding mode.
RTSP Multicast (Confidence)
rtsp://<SMP35x_IP>/<stream name 3>/multicast
or
HTTP://<SMP35x_IP>/live/pull/multicast3.sdp
Push Stream URLs
PUSH Streaming:
Unicast (Destination IP must be set to the location where the stream is played)
TS/UDP
UDP://@:DESTINATION_PORT
TS/RTP
RTP://@:DESTINATION_PORT
ES/RTP (Archive Channel A
HTTP://<SMP35x_IP>/live/push/s1.sdp
ES/RTP (Archive Channel B)
HTTP://<SMP35x_IP>/live/push/s2.sdp
NOTE: This stream is available only on units that are set for dual
encoding mode.
ES/RTP (confidence)
HTTP://<SMP352_IP>/live/push/s3.sdp
Multicast (Destination IP must be multicast IP address)
TS/UDP
UDP://@<DESTINATION_IP>:DESTINATION_PORT
TS/RTP
RTP://@<DESTINATION_IP>:DESTINATION_PORT
ES/RTP (Archive Channel A)
HTTP://<SMP35x_IP>/live/push/s1.sdp
ES/RTP (Archive Channel B)
HTTP://<SMP35x_IP>/live/push/s2.sdp
NOTE: This stream is available only on units that are set for
dual encoding mode.
ES/RTP (confidence)
HTTP://<SMP35x_IP>/live/push/s3.sdp