Extron electronics SMP 300 Series User Manual

SMP300 Series • Web-Based User Interface 83
Streaming Presets
Streaming Presets allow the user to quickly switch between various streaming options.
There are 32 streaming presets that can be saved or recalled to archive and confidence.
Streaming presets save the following parameters:
STREAMING PRESETS
Preset name Multicast IP/destination (for Multicast only)
Streaming method and protocol QoS (for Push streaming only)
Stream port SAP setting (for Push streaming only)
MTU RTMP publish URL (for RTMP push only)
TTL Destination IP/hostname
RTSP Stream Name Advanced section of RTMP, such as RTMP
port, primary and backup server URL,
stream name, username, and password (for
RTMP push only)
RTSP over HTTP port (Pull streaming only)
Audio Encoding
Which input signals are combined to form the encoded audio output vary depending on
audio channel selection and the status of the dual analog mono option, as detailed in the
following table:
Audio Encoding Channel
Selection
Channel B Dual
Analog Mono Status
Channel Input and Output
Channel A Disabled Enc L = ChA L
Enc R = ChA R
Channel B Disabled Enc L = ChB L
Enc R = ChB R
ChB Dual Mono Enabled Enc L = ChB L + ChB R
Enc R = ChB L + ChB R
ChA + ChB Disabled Enc L = ChA L + ChB L
Enc R = ChA R + ChB R
ChA + ChB Dual Mono Enabled
Enc L = ChA L + ChB L + ChB R
Enc R = ChA R + ChB L + ChB R
NOTES:
• Enc = Encoded output channel
• Ch n = Input channel n
• L = Left, R = Right
• Dual analog mono audio is available only on input channel B. If you enable this
feature, all audio input for channel B should be analog mono, though digital stereo
is accepted on input 4.
• Set the dual analog mono audio status in Configuration > Input/Output
Settings > Input/Output Configuration.
• Select the audio encoding channel in Configuration > Encoding & Layout >
Encoding Presets > Channel Selection.

Extron electronics SMP 300 Series Specifications

General

Brand	Extron electronics
Model	SMP 300 Series
Category	Computer Hardware
Language	English