Fagor 8055 M - Page 145

Programming manual
CNC 8055
CNC 8055i
TOOL COMPENSATION
8.
·M· & ·EN· MODELS
SOFT: V02.2X
·145·
Tool length compensation (G43, G44, G15)
Example of machining with tool length compensation:
It is assumed that the tool used is 4 mm shorter than the programmed one.
Tool length -4mm
Tool numbe r T1
Tool offset number D1
; Preset
G92 X0 Y0 Z0
; Tool, offset ...
G91 G00 G05 X50 Y35 S500 M03
; Begins compensation
G43 Z-25 T1 D1
G01 G07 Z-12 F100
G00 Z12
X40
G01 Z-17
; Cancels compensation
G00 G05 G44 Z42 M5
G90 G07 X0 Y0
M30