·46·
Programming manual
CNC 8055
CNC 8055i
3.
AXES AND COORDINATE SYSTEMS
·M· & ·EN· MODELS
SOFT: V02.2X
Coordinate programming
3.5 Coordinate programming
The CNC allows the selection of up to 7 of the 9 possible axes X, Y, Z, U, V, W, A, B, C.
Each of these may be linear, linear to position only, normal rotary, rotary to position only or rotary
with hirth toothing (positioning in complete degrees), according to the specification in the machine
parameter of each "AXISTYPE" axis.
With the aim of always selecting the most suitable coordinate programming system, the CNC has
the following types :
• Cartesian coordinates
• Polar coordinates
• Cylindrical coordinates
• Angle and Cartesian coordinate
To Next Page
Loading...
