·424·
Programming manual
CNC 8055
CNC 8055i
15.
COORDINATE TRANSFORMATION
·M· & ·EN· MODELS
SOFT: V02.2X
Movement in an inclined plane
15.1 Movement in an inclined plane
An inclined plane is any plane in space resulting from the coordinate transformation of the X, Y, Z
axes.
Any plane in space may be selected to carry out machining operations in it.
The coordinates are programmed as if it were a regular XY plane, but the program will be executed
in the indicated inclined plane.
To work with inclined planes, always proceed as follows:
1. Define, with G49, the inclined plane corresponding to the machining operation. G49 is described
later on in this chapter.
2. The CNC variables TOOROF, TOOROS and parameters P297, P298 show the position to be
occupied by the spindle rotary axes (main and secondary spindle respectively) in order to orient
the tool perpendicular to the indicated inclined plane.
3. To work with the tool perpendicular to the inclined plane, rotate the spindle rotary axes to the
indicated position.
From this moment on, the X, Y movements are carried out along the selected plane and those of
the Z axis will be perpendicular to it.
To Next Page
Loading...
