·152·
Programming manual
CNC 8055
CNC 8055i
9.
CANNED CYCLES
·M· & ·EN· MODELS
SOFT: V02.2X
Canned cycle cancellation
9.3 Canned cycle cancellation
A canned cycle can be canceled via :
• Function G80, which can be programmed in any block.
• After defining a new canned cycle. This will cancel and replace any other that may be active.
• After executing M02, M30, or after EMERGENCY or RESET.
• When searching home with function G74.
• Selecting a new work plane via functions G16, G17, G18, or G19.
To Next Page
Loading...
