CNC 8055
CNC 8055i
·M· & ·EN· MODELS
SOFT: V02.2X
9
·147·
CANNED CYCLES
These canned cycles can be performed on any plane, the depth being along the axis selected as
longitudinal via function G15 or, in its absence, along the axis perpendicular to this plane.
The CNC offers the following machining canned cycles :
G69 Complex deep hole drilling
G81 Drilling canned cycle.
G82 Drilling cycle with dwell.
G83 Deep hole drilling canned cycle with constant peck (drilling step).
G84 Tapping canned cycle.
G85 Reaming canned cycle.
G86 Boring cycle with withdrawal in G00
G87 Rectangular pocket canned cycle.
G88 Circular pocket canned cycle.
G89 Boring cycle with withdrawal in G01
G210 Bore milling canned cycle
G211 Inside thread milling canned cycle.
G212 Outside thread milling canned cycle.
It also offers the following functions that can be used with the machining canned cycles:
G79 Change of canned cycle parameters.
G98 Return to the starting plane at the end of the canned cycle
G99 Return to the reference plane at the end of the canned cycle.
To Next Page
Loading...
