·274·
Programming manual
CNC 8055
CNC 8055i
11.
IRREGULAR POCKET CANNED CYCLE
·M· & ·EN· MODELS
SOFT: V02.2X
3D pockets
Programming example ·3·
The island of this example has 3 different depth profiles, type A, type B and type C. To define the
island, 3 contours are used: contour A, contour B and contour C.
; Tool dimensions.
(TOR1=4,TOI1=0,TOR2=2.5,TOI2=0)
; Initial positioning and definition of the 3D pocket.
G17 G0 G43 G90 Z25 S1000 M3
G66 R200 C250 F300 S400 E500
M30
; Definition of roughing operation.
N200 G67 B5 C4 I-20 R5 V100 F700 T1 D1 M6
; Definition of the semi-finishing operation
N250 G67 B2 I-20 R5 V100 F850 T1 D1 M6
; Definition of finishing operation.
N300 G68 B1.5 L0.25 Q0 I-20 R5 V100 F500 T2 D2 M6
; Definition of pocket geometry. Blocks N400 through N500.
N400 G17
To Next Page
Loading...
