Fagor 8055 M - Page 277

Programming manual
CNC 8055
CNC 8055i
IRREGULAR POCKET CANNED CYCLE
11.
·M· & ·EN· MODELS
SOFT: V02.2X
·277·
3D pockets
; Tool dimensions.
(TOR1=4,TOI1=0,TOR2=2.5,TOI2=0)
; Initial positioning and definition of the 3D pocket.
G17 G0 G43 G90 Z25 S1000 M3
G66 R200 C250 F300 S400 E500
M30
; Definition of roughing operation.
N200 G67 B5 C0 I-30 R5 V100 F700 T1 D1 M6
; Definition of the semi-finishing operation
N250 G67 B1.15 I-29 R5 V100 F850 T1 D1 M6
; Definition of finishing operation.
N300 G68 B1.5 L0.25 Q0 I-30 R5 V100 F500 T2 D2 M6
; Definition of pocket geometry. Blocks N400 through N500.
N400 G17
; Definition of outside contour. Plane profile.
G90 G0 X-70 Y20 Z0
G1 X70
Y-90
X-70
Y20
; Definition of contour 1. Plane profile.
G17
G90 G0 X42.5 Y5
G1 G91 X-16
Y-60
X32
Y60
X-16
; Depth profile.
G16 YZ
G0 G90 Y5 Z-30
G3 Y-25 Z0 J-30 K0